[RrCoX22]

I finally got around to modifying my pro 5.0 after installing it about 2 weeks ago... Ya that's right modifying the original piece since the springs provided didn't exactly feel like doing there jobs and centering the shifter stick. Not to mention that Lou's short shifter stick is not exactly beneficial since the base isn't cut at an angle to compensate for the irregular placement of the shifter within the center console bezel... so I cut the one provided with the shifter assembly.

Here's some pics of putting bolts ontop of the springs but then having to re-adjust again as having both bolts is too much pressure in getting the shifter to go in reverse. So just the one on the passenger side was used. Also what the cut bolts look like and the stick going under the knife Although it was actually all fun doing